true (May not apply to all OS Revisions. Please refer to 'General Notes')
General Notes:
This blade server is certified on a BCHT chassis using Solaris 10 10/09
CPU: Dual 6 core Intel Xeon X5670 2.93GHz
LSI 1064E SAS controller in a RAID 0 configuration
Patches: 144870-02 is needed for the 42C1830 to work.
BIOS/Firmware Maker and Version:IBM - UEFI:[P9E148AUS-1.09] - 06/25/2010 IMM: YUOO73M
Chipset: Intel 5520 I/O Hub to ESI Port
Certified with the following option cards:
IBM 42C1830 Qlogic 2 port 10 Gb converged network card IBM 44X1945 Qlogic 8 Gb Fiber channel expansion card
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net
is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port
------------------------------------------------------------------------------------------------------
There is no support for UEFI in Solaris. Booting/Installing over the net
is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port ->
Go to the Enable PXE item -> Select Legacy Support
For Solaris 10 05/09:
1. This Blade Server HS22-7870 is certified on BCH Chassis and also on a BCHT chassis.
2. Each CPU has 4 cores with 2 way simultaneous Hyper-Threading
3. Existing Matrox G200eV graphics core does not display correctly on Solaris 10 05/09. To work around the display problem, install the system using the text based install option. Patch 125720-32 must be added post-install for proper GUI display. This patch can be downloaded from My Oracle Support website located at: